Influence of aging on bond strength of artificial teeth to denture base acrylic resins

Aim: The aim of this study was to evaluate the bond strength of artificial teeth to different types of denture base resins when submitted to thermomechanical cycling (TMC). Methods: Sixty artificial mandibular first molars (Trilux, Vipi) were randomly divided into 3 groups according to denture base acrylic resins (Vipi Wave, Vipi Cril, and Vipi Cril Plus, Vipi). The teeth were fixed onto self-polymerizing acrylic resin bars (0.5 cm2 cross-section x 2 cm height), and the set was included in a metal flask using dental stone/silicone. After the dental stone was set, the bar was removed, and the denture base resin was packed and processed according to the group studied (Vipi Wave: 180 W/20 minutes + 540W/5 minutes; Vipi Cril and Vipi Cril Plus: Water bath at 74ºC for 9h). After polymerization, the samples were divided into 2 groups (n=10), according to the TMC treatment received (simulation of 5 years of mastication or not). The samples were submitted to tensile bond strength test (1 mm/min), and the data (MPa) were statistically analyzed (2-way ANOVA, Bonferroni, α=0.05). The fracture interfaces were evaluated using a stereomicroscope (50x). Results: The bond strength results showed no statistically significant difference (p>0.05) between the resins studied. TMC was significant (p<0.05), demonstrating lower values for the bond strength of artificial teeth to Vipi Cril Plus. The predominant fracture type was cohesive in resin. Conclusions: It was concluded that there is no difference in bond strength between artificial teeth and the resins used for denture base. However, TMC decreases the bond strength values of artificial teeth and crosslink thermo-polymerizable acrylic resin

Influence of Different Types of Resin Luting Agents on Color Stability of Ceramic Laminate Veneers Subjected to Accelerated Artificial Aging

Abstract The aim of this study was to evaluate the influence of accelerated aging (AAA) on the color stability of resin cements for bonding ceramic laminate veneers of different thicknesses. The occlusal surfaces of 80 healthy human molars were flattened. Ceramic laminate veneers (IPS e-max Ceram) of two thicknesses (0.5 and 1.0 mm) were bonded with three types of luting agents: light-cured, conventional dual and self-adhesive dual cement. Teeth without restorations and cement samples (0.5 mm) were used as control. After initial color evaluations, the samples were subjected to AAA for 580 h. After this, new color readouts were made, and the color stability (ΔE) and luminosity (ΔL) data were analyzed. The greatest color changes (p<0.05) occurred when 0.5 mm veneers were fixed with light-cured cement and the lowest when 1.0 mm veneers were fixed with conventional dual cement. There was no influence of the restoration thickness when the self-adhesive dual cement was used. When veneers were compared with the control groups, it was verified that the cement samples presented the greatest alterations (p<0.05) in comparison with both substrates and restored teeth. Therefore, it was concluded that the thickness of the restoration influences color and luminosity changes for conventional dual and light-cured cements. The changes in self-adhesive cement do not depend on restoration thickness.

Resumo O objetivo deste estudo foi avaliar a influência do envelhecimento artificial acelerado (EAA) sobre a estabilidade de cor de cimentos resinosos para fixação de laminados cerâmicos em diferentes espessuras. Oitenta molares humanos hígidos tiveram as faces oclusais planificadas. Laminados cerâmicos (IPS e-max Ceram, Ivoclar Vivadent) em duas espessuras (0,5 e 1,0mm) foram fixados com 3 tipos de cimentos: Fotoativado (Variolink II, Ivoclar/Vivadent), Dual convencional (Variolink II + catalisador, Ivoclar/Vivadent) ou Dual auto-adesivo (Rely-X Unicem, 3M ESPE). Dentes sem restaurações e amostras de cimentos (0,5mm) foram utilizados como controle. Após as leituras de cor iniciais (Vita EasyShade, VITA), as amostras foram submetidas a EAA por 580 horas. Em seguida, novas leituras de cor foram realizadas e os dados de estabilidade de cor (ΔE) e luminosidade (ΔL) foram analisados (ANOVA, dois fatores e Bonferroni, p<0,05). As maiores alterações de cor (p<0,05) ocorreram quando as restaurações de 0,5 mm foram fixadas com cimento fotoativado, e as menores quando restaurações de 1.0mm foram fixadas com cimento dual convencional. Não houve influência (p>0,05) da espessura da restauração quando utilizado o cimento dual autoadesivo. Quando as restaurações foram comparadas aos grupos controle (ANOVA um fator e Tukey, p<0.05), verificou-se que as amostras de cimento apresentaram as maiores alterações (p<0,05) em relação ao substrato e aos dentes restaurados. Conclui-se que a espessura da restauração influencia na alteração de cor e na luminosidade do cimento dual convencional e fotoativado. As alterações do cimento autoadesivo não dependem da espessura da restauração.

Effect of polishing and brushing on removal of cigarette smoke stains from artificial teeth / Efecto del pulido y cepillado en la eliminación de manchas de humo de cigarrillo en dientes artificiales

Color alteration is still a disadvantage of acrylic resin teeth and this problem seems to be greater in smokers. The objective of this study was to evaluate the efficiency of polishing and brushing on removal of stains from artificial teeth submitted to cigarette smoke. Forty denture teeth of distinct shades (62 and 69) were selected. The teeth were divided into 4 groups (n= 10), according to the tooth shade and method of stain removal performed: Groups 1 and 2 were submitted to the smoke of 20 cigarettes, and after new color readouts, were submitted to polishing with pumice stone and Spanish white paste. Groups 3 and 4 were submitted to 4 cycles of 5 cigarettes interspersed with standardized manual brushing. The values of color stability (DE) were compared using 2-way ANOVA, Bonferroni test (p<0.05). For all the groups, color change occurred at clinically unacceptable levels (E>3.3). After exposure to 20 cigarettes, the greatest degree of color change occurred for teeth in shade 62. Polishing significantly reduced the color change for groups 1 and 2, however, without significant difference between them. For Groups 3 and 4 there was no difference between the teeth of shade 62 and 69. When the treatments for each tooth shade were compared alone, there was similarity between polishing and brushing irrespective of the shade of samples. Routine manual brushing and common clinical polishing methods were capable of removing a large portion of staining caused by cigarettes, and there was no difference between the methods.

La alteración del color sigue siendo una desventaja de los dientes de resina acrílica y este problema parece ser mayor en los fumadores. El objetivo de este estudio fue evaluar la eficacia de pulido y cepillado en la eliminación de manchas de los dientes artificiales presentados al humo del cigarrillo. Se seleccionaron cuarenta dientes de la dentadura de tonos diferentes (62 y 69). Los dientes fueron agrupados en 4 grupos (n= 10), de acuerdo con el color del diente y el método de eliminación de manchas realizado: Los grupos 1 y 2 fueron sometidos al humo de 20 cigarrillos, y después de nuevas lecturas de color, se pulieron con piedra pómez piedra y pasta blanca española. Los grupos 3 y 4 se sometieron a 4 ciclos de 5 cigarrillos intercalados con cepillado manual estandarizado. Los valores de estabilidad del color (Delta E) se compararon mediante las pruebas de ANOVA de dos vías y Bonferroni (p<0,05). Para todos los grupos, el cambio de color se produjo a niveles no aceptables clínicamente (DE>3,3). Después de la exposición a 20 cigarrillos, el mayor grado de cambio de color se produjo para los dientes de tono 62. El pulido redujo significativamente el cambio de color para los Grupos 1 y 2, sin diferencia significativa entre ellos. Para los Grupos 3 y 4 no hubo diferencia entre los dientes de tono 62 y 69. Cuando los tratamientos para cada color de diente se compararon individualmente, hubo similitud entre el pulido y el cepillado, independientemente del tono. El cepillado manual rutinario y los métodos comunes de pulido clínicos fueron capaces de eliminar una gran parte de manchas causadas por los cigarrillos, sin diferencia entre los métodos.